Torque Converter Go Kart Clutch Set 3/4 inch 12T #35 Chain Replace for Manco Comet TAV2 Mini Bike

Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches, fit all engines with a 3/4 inch straight crankshaft. Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75 Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors. Driver clutch bore: 3/4″(16mm), Driven unit: Overall Diameter 6″ (5/8″ driven pulley) , Belt Top Width: 19mm(3/4″), Sprocket teeth: 12 teeth for #35 chain This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware.
Specifications:

Material: Iron & Aluminum

Drive clutch bore: 3/4″(19mm)

Driven unit: Diameter 6″ (5/8″ driven pulley)

Sprocket teeth: 12 tooth #35 chain

Engagement range: 2350 200 RPM

Recommended engine: 2HP-8HP

Belt: Asymmetrical type

Fits: All engines with a 3/4 inch straight crankshaft

Included: 1 x Drive Belt 1 x Plastic Cover 1 x 3/4″ Driver Pulley 1 x 5/8″ Driven Pulley (6″ Diameter) 1 x Aluminum Mounting Plate 1 x 12 Tooth Sprocket for #35 Chain 1 x Mounting Hardware Kit
Replaces OEM Part Numbers Comet 218353AComet 219552AComet 219456AComet 217610AComet 203814ATAV2 30-75Yelf Dog Drive Unit Q43201W
IMPORTANT Center to Center spacing for the driver and driven pulley needs to be between 6 5/8 inch and 6 11/16 inch.2 1/2 angle (flat side) of belt must be against the 2 1/2 angle pulley flange(Next to engine).
3/4 Inch 10T & 12T
3/4 Inch 10T
1 Inch 10T &12T
3/4 Inch 10T with Chain
3/4 Inch 12T with Chain
Type
Troque Converter Troque Converter Troque Converter Centrifugal Clutch Centrifugal Clutch
Drive Clutch Bore
3/4″(19MM) 3/4″(19MM) 1″(25.4MM) N/A N/A
Driven Unit
Diameter 6″ (5/8″ Driven Pulley) Diameter 6″ (5/8″ Driven Pulley) Diameter 6″ (5/8″ Driven Pulley) N/A N/A
procket teeth
10 Tooth #40/41Chain and 12 Tooth #35 Chain 10 Tooth #40/41Chain 10 Tooth #40/41Chain and 12 Tooth #35 Chain 10 Tooth #40/41Chain 12 Tooth #35 Chain
Engagement range
2350 200 RPM 2350 200 RPM 2350 200 RPM 2300 300 RPM 2300 300 RPM
Recommended engine
2HP-8HP 2HP-8HP 2HP-8HP 2HP-7HP 2HP-7HP
Belt
Asymmetrical Type Asymmetrical Type Asymmetrical Type N/A N/A