For Audi TT VW Passat Jetta Golf Beetle Clutch Slave Cylinder 1J0721261J

Installation Procedure:
Grab your creeper and go under the vehicle.
Get your drip pan and place it under the slave cylinder.
Warning: Do not cross thread the hydraulic line as you install it. Brake fluid will leak out.
Bleed the hydraulic line to slave cylinder
Note: If the air does not all come out you will need to bleed the air from the line attached to the clutch master cylinder. Follow the same procedures as you did with the slave cylinder bleeder screw.
Top off brake fluid.
Operating Principle:
A clutch slave cylinder is a member of the clutch system that provides leverage assistance to the clutch fork.
The clutch slave cylinder operates just like a hydraulic cylinder on a boom lift. The cylinder is connected to the clutch master cylinder located on the firewall next to the brake master cylinder through a hose.
When you push the clutch pedal, brake fluid flows from the clutch master cylinder to the slave cylinder, applying the pressure necessary to engage the clutch.
When you release the clutch pedal, a return spring located on or in the slave cylinder will force the brake fluid back to the clutch master cylinder.
Package:1 Pcs clutch slave cylinder Fitment:
Make Model Year Engine Audi TT 2000-2002 l4 1.8L Volkswagen Beetle 1999-2005 l4 1.8L Volkswagen Beetle 2006-2010 l5 2.5L Volkswagen Golf 1998-2006 l4 2.0L Volkswagen Jetta 1999-2005 l4 2.0L Volkswagen Jetta 1999-2004 V6 2.8L