212CC Torque Converter 6.5 HP 3/4″ Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set – 30 Series

30 Series Toruqe Converter Belt for 6″ Driven Length: 70.5cm / 27.76″, Outside circumference: 27 23/64″ , Width is 3/4″. 1.9cm / 0.75″). Center to Center of driver and driven: 6-15/16 to 7″.

For your convenience this kit comes with 1 x 3/4″ Driver Pulley;1 x 5/8″ Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware.

INSTALLATION:

Step #1: Componets in kit are layed out in front of machine.

Step #2: Remove old clutch kits

Step #3: Bolt bracket to the four standard tapped holes in the engine crankcase using four M8*25 screws. Bracket may be rotated up or dow if necessary.

Step #4: Break chain at proper length to go around sprocket on T.A.V. and final drive sprocket. Join chain by the master link. Move the engine forward or backward for correct tension.

Step #5: Place the spacer (provided with kit) on the crankshaft, to bring the driver clutch in line with the driven unit.

Step #6: Separate driver, place flat sided sheave on crankshaft. Slip belt over driven unit and over post of driver unit. Install 4 splined hub “D” outboard. (IMPORTANT: Be sure bronze idler bushing is in place on TAV 30-75. TAV 30-100 does not require bronze idler bushing.)

Step #7: Place other half of drive on crankshaft. Line up outer cover on the “D” part of the hub, and install retaining bolt and washer.
Fitment: All engines with a 3/4 inch straight crankshaft, Go Karts 30 Series.