Husqvarna YTH184 blade drive belt

More product information Husqvarna 93Li blade drive belt 42″-107cm side discharge
Outer length: La2412mm
Working length: Lw2391mm
Inner length: Li2360mm
Width: 13mm (1/2″)
Height: 9mm
Manufacturer Mitsuboshi 13x2360Li
Application: Brand Replacement /
Original No. Models / Type
ARIENS AR07213900 AYP 144959 HUSQVARNA 5321449-59,5321802-15 GTH220, GTH225, GTH250, LT152, LTH145, LTH174, LTH1842, LTH2142, TS242, TS243, TS342, YTH130, YTH150, YTH151, YTH180, YTH184, YTH184T, YTH1842
JONSERED JO532144959 LT2218A MURRAY 21615, 24176, 37X11 36”, 38”, 42″ PARTNER P12-107H,P18107H How measure the belt:
Outer circumference – LA is measured on the outside of the belt. In the case of longer belts, it is important to measure in an arc on the outside (with a tailor’s tape measure).
Working circumference – LW is measured in a straight line, after cutting, by stretching the tape measure along the belt (with a measuring tape).
Inner circumference – LI is measured inside the belt (with a special tape measure for belts).
You should also remember about the
Width of the belt, if the original belt is 13mm (1/2″) wide, you should not use a belt 10mm (3/8″) or 17mm (5/8″) wide.