Husqvarna Proflex Combi drive belt

More product information 94″La blade drive belt Husqvarna Combi 122, Proflex 18, Proflex 21, Proflex 21 AWD, Proflex 21 II, R422Ts, R422Ts AWD
Outer length: La2390mm.
Working length: Lw2372mm
Inside length: Li2330mm
Width: 13mm (1/2″)
Manufacturer: Kramp FGP013482
Replacement / Original No. – 5895311-01, 5310092-21, 5354248-01 Note: Before ordering, make sure that the
Replacement / Original No. belt matches the mower specification.
Application:
How to measure a belt:
Outer circumference – LA is measured on the outside of the belt. In the case of longer belts, it is important to measure in an arc on the outside (with a tailor’s tape measure).
Working circumference – LW is measured in a straight line, after cutting, by stretching the tape measure along the belt (with a tape measure).
Inner circumference – LI is measured inside the belt (with a special tape measure for belts).
Remember also about the
Width of the belt, if the original belt is 13mm (1/2″) wide, do not use a belt with a
Width of 10mm (3/8″) or 17mm (5/8″).