1. Start by making sure the clutch is dry and clean. Use a soft, clean cloth to wipe down the clutch components.

2. Place the clutch plate onto the flywheel. Make sure the holes of the clutch plate are aligned with the flywheel so that the clutch bolts can be inserted.

3. Install the pressure plate. Make sure the pressure plate is centered on the flywheel so that all of the bolts can be inserted evenly.

4. Install the clutch bolts. Insert the bolts through the flywheel and pressure plate. Make sure to use the correct size bolts.

5. Install the clutch release bearing. This is typically done by placing the bearing into the bell housing and then sliding the bearing onto the clutch release fork.

6. Install the clutch release fork. Insert the fork into the bell housing and then connect it to the clutch release bearing.

7. Adjust the clutch by tightening or loosening the clutch cable. Make sure the cable is tight but not too tight.

8. Install the clutch cover. Make sure to use the correct size bolts and to tighten them evenly.

9. Reconnect the battery and start the engine. Test the clutch by shifting into first gear and then depressing the clutch pedal. Make sure the engine does not stall. If it does, adjust the clutch cable as necessary.

“Keyword”
“install clutch on go kart”
“how to build a clutch for a go kart”