ombparts

Centrifugal Clutch 3/4″ Bore #35 Chain 12 Tooth for Go Karts Mini Bike Replace Parts (12T Centrifugal Clutch with #35 Chain)

Categories

Centrifugal Clutch 3/4" Bore #35 Chain 12 Tooth for Go Karts Mini Bike Replace Parts (12T Centrifugal Clutch with #35 Chain)

SKU LHQ+LT.00107 MS-95221 Category Brand

SPREAD THE LOVE

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on telegram
Share on email
Share on whatsapp
Share on reddit

Description

Centrifugal Clutch 3/4″ Bore 12 Tooth for 35 Chain Common clutch for 2-7 HP engines 2300 300 PRM Fits Honda GX160 GX200 GX140 GX120 GC160 GC190 Harbor Freight Greyhound 196cc Harbor Freight Predator 212cc Fit Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4″ shaft Tecumseh Engines Also fits any other engines with 3/4 crank shaft and 3/16″ key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands Go Kart Clutch kit includes two set screws and chain
You Will Get: 1 x 12 teeth centrifugal clutch1 x #35 chain Go Kart Clutch kit includes two set screws and chain.
Specifications:

Centrifugal clutch designed to be used on one wheel karts with rear tires no larger than 15″ tall, and engines 2hp-7hp. Larger tires and live axles recommend using Torque-converter ( ASIN:B07T1KRS4V)

Clutch Bore: 3/4″

procket: 12 teeth for #35 chian

Clutch Dia: 107mm

Clutch Height: 55mm

Engagement Speed: 2300 300 RPM

Recommended Engine: 2HP – 6.5HP, 3/4″ shaft with flat key

Fitment: Fit for 2-6.5hp Honda & Honda cloned engines GC160, GC190, GX120, GX140, GX160, GX200 Perfect for Go Kart Minibike Baja Mini Bike MB165 & MB200 (Baja Heat, Mini Baja, Baja Warrior) Common clutch for 3.5-7hp engines using #35 Chain Briggs & Stratton and 2 – 6.5 HP with 3/4″ Shaft Tecumseh Engines 2 – 7 HP with 3/4″ Shaft
How Do You Install A New Clutch on A Go Kart ASSEMBLY INSTRUCTIONS:

Step 1: Remove outer drive cover. Loosen nuts on bottom of engine mounting plate allowing engine to slide back,loosening drive chain.

Step 2: Remove drive chain from drive wheel sprocket(axle sprocket). Remove bolt and washers from end of engine crankshaft while noting location of spacers and washers for installing new clutch.

Step 3: Remove clutch from engine crankshaft. Install new clutch by aligning key inbore of clutch with keyway in engine crankshaft. Slide clutch onto shaft.
Step 4: Reinstall bolt and washers that hold clutch on crankshaft. Tightenbolt.

Step 5: Reinstall drive chain on clutch and drive wheel sprocket(axlesprocket).

Step 6: Slide engine forward to tighten chain. Chain should have approximately 1/4″ deflection when properly tensioned.

Step 7: Tighten nuts on bottom of engine mounting plate. Reinstall outer drive cover.

Contact
Contact