2003-2006 Chevy Silverado 2500HD Trailer Hitch with 7-Pin Wiring - 6' Bed

This Trailer Tow Hitch + 7-WayFits The Following Vehicles:
2003 – 2006 Chevrolet Silverado 2500 HD 6′ Bed
This Trailer Tow Hitch + 7-Way Includes the Following Parts:
Class 3 Hitch, 2″ (Easy Bolt-On, No Drilling)
Dual-Output 7 & 4-Way Connector (Plugs into USCAR)
Installation instructions, schematics, diagrams, and hardware (if required).
List ofFitment Years:
2003, 2004, 2005, 2006
13108 Class 3 Trailer Hitch, 2-Inch Receiver
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — class 3 trailer hitches offer the strength needed for serious towing They make it easy to hitch up and Bring It, offering a vehicle-specificFit and the weight capacity to handle a variety of trailers Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs.
Because of their weight range, they are also found on full-size cars, crossovers and minivans Each custom-fit class 3 hitch package is made for vehicle-specific mounting This particular kitFits certain years of the Chevy Silverado 2500 HD or 2500 HD Classic and GMC Sierra 2500 HD or 2500 HD Classic (see application info to verify vehicle compatibility).
It provides a weight carrying capacity of 6,000 lbs GTW and 600 lbs TW.
It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs WD and 1,000 lbs WDTW.
class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component) Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety To ensure that class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding.
We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage..
Features:
Rated to 6,000 lbs. gross trailer weight and 600 lbs. tongue weight
Compatible with weight distribution hitch (10,000 lbs. WD / 1,000 lbs. WDTW)
Engineered with a vehicle-specific design for a customFit
Tested for safety in accordance with SAE J684
Precisely welded for superior strength andFit
Protected by a durable high-gloss black powder coat finish
Co-cured in a rust-resistant liquid A-coat, inside and out
Equipped with an open-back receiver for easy cleaning
55774 Dual-Output Vehicle-Side 7-Pin, 4-Pin Connectors, Factory Tow Package and USCAR Socket Required
A custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring Most vehicles do not come ready to tow Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector.
This is where CURT’s custom wiring connectors come into play A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector.
With a custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided This special custom wiring connector actually provides two connector sockets for a multipurpose option It plugs into an OEM connector and offers a 4-way flat and 7-way RV blade connector.
It comes with a mounting bracket for easy installation and is designed to be a custom wiring option for a variety of vehicles (see application info to verifyFitment) custom wiring connectors are designed to be long-lasting and simple to install They come with dust covers to keep your connector clean when not in use..
Features:
Dual-Output 7 & 4-Way Connector (Plugs into USCAR)
Plugs into USCAR socket to provide 4-way and 7-way trailer wiring connectors
Fits USCAR-equipped vehicles with factory tow plugs only
Simple plug-and-play design eliminates the need for cutting or splicing
4-way flat output connects tail lights, brake lights and turn signals
7-way RV blade socket adds reverse lights, electric brakes and auxiliary power
Dust covers included to keep connectors clean when not in use
Slit loom keeps wires contained and well protected
Metal bracket securely mounts wiring to the vehicle or trailer hitch