1. Park the ATV/UTV on a level surface and remove the spark plug wire from the spark plug.

2. Drain the oil from the engine by removing the oil drain plug located at the bottom of the engine.

3. Remove the primary drive clutch cover and loosen the primary drive clutch bolt.

4. Remove the belt from the driven clutch and then remove the driven clutch.

5. Install the new driven clutch and align it with the primary drive clutch.

6. Reinstall the belt and then tighten the primary drive clutch bolt.

7. Reinstall the primary drive clutch cover and fill the engine with oil.

8. Reinstall the spark plug wire and start the engine.

9. Run the engine for a few minutes and then check for proper operation.

“Keyword”
“how atv clutch works”
“how to replace clutch motorcycle”
“clutch atv”