1. Begin by removing the primary drive clutch cover by removing the screws that hold it in place.

2. Remove the primary drive clutch and inspect it for any signs of wear or damage and replace if necessary.

3. Measure the clutch engagement point by inserting a feeler gauge between the sheave and the belt.

4. Adjust the primary drive clutch by loosening the jam nut on the primary drive clutch and turning the adjusting screw clockwise to increase the engagement point or counterclockwise to decrease the engagement point.

5. Tighten the jam nut and re-measure the engagement point to ensure that the adjustment was successful.

6. Reinstall the primary drive clutch and the clutch cover.

7. If necessary, adjust the secondary drive clutch in the same manner as the primary drive clutch to ensure it is functioning properly.

8. Test the ATV/UTV to ensure that the adjustments were successful.

“Keyword”
“atv clutch adjustment”
“atv clutch problems”
“how to adjust clutch on motorcycle”
“slp clutch kit”
“utv with manual transmission”
“starting line products”