1. Put the golf cart in neutral. Do this by pressing the accelerator pedal all the way down, then shift the lever into neutral.

2. Locate the engine cover. This is usually located at the front of the golf cart and is the plastic cover that hides the motor and other mechanical components.

3. Remove the engine cover. This can be done by unscrewing the screws that hold it in place, or by simply lifting it off.

4. Locate the clutch. This is typically located at the lower back of the engine and is comprised of two metal plates with a friction material in between them.

5. Adjust the clutch. This can be done by adjusting the tension on the clutch cable. To do this, loosen the nut on the clutch cable and then rotate the cable until it is tight.

6. Test the clutch. Put the golf cart back into neutral and press the accelerator pedal. If the clutch engages and the golf cart moves forward, then the adjustment was successful. If not, repeat the adjustment process until it works correctly.

7. Replace the engine cover. This can be done by simply pressing it back into place and then screwing the screws back in.

8. Take the golf cart for a test drive. Make sure the clutch engages and disengages properly and that the golf cart is running smoothly. If everything is working correctly, then the adjustment was successful. able to move forward and that the clutch engages correctly. If not, repeat the adjustment process until it works correctly.

“Keyword”
“how to adjust a golf cart clutch”
“how to adjust the clutch on a club car golf cart”