Month: February 2023

How does a clutch actually work? The clutch is made up of three main parts – the clutch plate, pressure plate and flywheel. When the clutch is engaged the springs in the clutch press these three parts together so that the engine and the transmission are connected and spinning at the same speed. You need …

Tell you 5 situations where the clutch needs to be replaced Read More »

Acceleration Problems Oftentimes, a clutch that is wearing down won’t catch, and you will end up with acceleration problems. Your engine will rev, but your vehicle won’t go anywhere. This is because the clutch has not engaged completely, and you may not be in first gear. This can also happen when you downshift and try …

Tell you when the clutch is damaged and needs to be replaced or adjusted Read More »

The transmission of the Utility Task Vehicle (UTV) changes the speed of the wheels and the engine. A range of gears, from low to high gear, is used to make the engine’s torque effective as driving conditions change. You can change the gear automatically or manually. However, nowadays, most UTVs use automatic transmission, which is …

Tell you how the UTV clutch and transmission work Read More »

Step 1. Remove the left rear wheel. Step 2. Remove the airbox by tilting back the rear cargo bed, taking off the three 10mm bolts, and loosening the two air hose clamps that secure the airbox in place. Step 3. Remove the 10mm zerk fitting located on the upper A-arm forward mounting bolt. This makes removing the …

Tell you how to replace the drive clutch Read More »

CVT CLUTCH BASICS AND FUNCTIONING UTVs are unique vehicles in that they run on a stock continuously variable transmission, or CVT. CVTs allow the rider to accelerate their UTV without needing to manually adjust their gears as they reach different speed benchmarks. They do this by controlling what RPM both the engine and transmission can …

Tell you the basic knowledge of UTV clutch Read More »